TRANSITION MOLDING IS THE BUFFER WHICH HELPS YOU SURFACE TRANSITION TO THE OTHER SO THAT THERE ARE NO ABRUPT OR UNFINISHED EDGES IN YOUR DWELLING. WHILE THEY FREQUENTLY GO UNNOTICED, THEY ARE ESSENTIAL FOR THE ELEGANCE AND FUNCTIONALITY OF YOUR FLOORING. TRANSITION MOLDING IS ALSO CRUCIAL FROM A SAFETY STANDPOINT, AS IT IS NECESSARY TO STOP TRIPPING BETWEEN WALKING FROM HARD SURFACE TO CARPETING.
The Functionality of Transition Molding
TRANSITION MOLDINGS POSSESS A VARIETY OF FUNCTIONS LIKE CREATING A SMOOTH TRANSITION FROM A FLAT FLAT SURFACE TO VERTICAL SURFACE, CHANGING HEIGHT GAP, SEPARATING ROOMS, AND PROVIDING A CLEAR EDGE TO A FLOORING LEDGE. THE TRANSITION MOLDINGS YOU SELECT CAN DEPEND ON INSTALLER TASTE AND SETUP PROCESS SO YOU SHOULD ALWAYS GET THEM INVOLVED.
Normally Used Transition Moldings
Stair Nosing is the most typical transition molding used in installations. This nice molding takes your flooring down a ledge with style by providing a curved drop. Stair nosing is available in Flush and Overlap and should be chosen depending on installation approach. Prioritize flush moldings when job site conditions allow.
For a transition to carpeting or tile in a different height, your installer will get a fantastic use for square nosing or end caps. These overlap the timber side and stay flush with an adjoining floor covering. If the floors matched up are equally surfaces at precisely the exact same height, a T-molding is often utilized to permit ample expansion space in a floating installation of engineered timber.
The molding that’s installed at the base of your wall is called baseboard molding. Quarter-round or Baseshoe molding is installed at the bottom of the baseboard to pay for the growth gap which is recommended by floor manufactures to prevent buckling when the flooring expands throughout humid seasons.
Odds are, in your house, there are going to be a number of different sorts of transitional molding that’s crucial to protect the flooring in your home. Unique Wood Floors offers a number of transition molding which will always be counted on for the attractiveness and function of your flooring.
Test your floors
Wooden floors are the most solid and classic material in each home this days. The elegance that wooden floors are showing us and keeping the fact that it last for many decades is making wood flooring an attractive for informed house owners!
If you have a hardwood flooring, you can refinish it and bring back the in it sparkle again!
Wood as a material base is a porous and vulnerable. Many people today usually choose to help their floors last longer as protecting them against moisture with sanding. A simple test to find out your floor condition is to place a drop of water on it- if the drop isn’t absorbed, or takes a few minutes to soak in,this mean that your wooden floor may be in good shape, but in case the drop soaks in immediately- this mean that it is time for renovation !
Oak is the most widely used hardwood. There are more than 60 species of oak, which can
be separated into two basic varieties; white and red. The red variety is also known as black oak (a reference to its bark). Oak is a heavy, strong, light colored hardwood. It is ring porous, due to the fact that more and larger conductive vessels are laid down early in the summer, rather than later. Prominent rings and large pores give oak a course texture and prominent grain. Oak also has conspicuous medullary rays which can be seen as “flakes” in quarter sawed oak lumber.Oak is the most popular wood used to craft American and English country designs. It is also used for Gothic and William & Mary reproductions, as well as many transitional and contemporary pieces.
SOFTWOODS top 3
PINE: Pine is a softwood which grows in most areas of the Northern Hemisphere. There are more than 100 species worldwide.
Properties: Pine is a soft, white or pale yellow wood which is light weight, straight grained and lacks figure.It resists shrinking and swelling. Knotty pine is often used for decorative effect.
Uses: Pine is often used for country or provincial furniture. Pickled, whitened, painted and oil finishes are often used on this wood.
ASH: There are 16 species of ash which grow in the eastern United States. Of these, the white ash is the largest and most commercially important.
Properties: Ash is a hard, heavy, ring porous hardwood. It has a prominent grain that resembles oak, and a white to light brown colour. Ash can be differentiated from hickory (pecan) which it also resembles, by white dots in the darker summer wood which can be seen with the naked eye. Ash burls have a twisted, interwoven figure.
Uses: Ash is widely used for structural frames and steam bent furniture pieces. It is often less expensive than comparable hardwoods.
HICKORY: There are 15 species of hickory in the eastern United States, eight of which are commercially important.
Properties: Hickory is one of the heaviest and hardest woods available. Pecan is a species of hickory sometimes used in furniture. It has a close grain without much figure.
Uses: Wood from the hickory is used for structural parts, especially where strength and thinness are required. Decorative hickory veneers are also commonly used.
TOP 10 HARDEST WOODS
1. Quebracho – From the Spanish “quebrar hacha,” which literally means
“axe breaker.” Aptly named, wood in the Schinopsis genus is among the
heaviest and hardest in the world.
2. Lignum Vitae -Widely accepted as the hardest wood in the world–this
wood has been listed as an endangered species and is listed in CITES.
Consider Verawood as a very close substitute.
3. Gidgee – This Australian endemic is both very heavy and very strong.
Some pieces are dark enough to be used as an ebony substitute: one that’s
even harder than the original article.
4. Snakewood – It’s easy to see what makes Snakewood so unique–its patterns
and markings resemble the skin of a snake. Limited supply and high demand
make this one of the most expensive woods on eart.
5. Verawood – Sometimes called Argentine Lignum Vitae, this wood is a gem:
inexpensive, great olive-green color, beautiful feathery grain pattern, and
it takes a great natural polish on the lathe.
6. Camelthorn – Formerly classified as a member of the Acacia genus, this
south African hardwood is a tough customer. The wood is stubbornly hard,
and the tree is protected by giant sharp thorns.
7. African Blackwood – In some parts of the world, this wood has achieved
an almost legendary status. Historical evidence points to this wood
(rather than Diospyros spp.) being the original “ebony.”
8. Black Ironwood – Pieces are very seldom seen for sale, as this tree is
too small to produce commercially viable lumber. Like the unrelated
Desert Ironwood, Black Ironwood is an excellent choice for small
9. Katalox / Wamara – Some pieces can be just about a dark as true ebony,
while others are a more reddish brown with black streaks. So much depth
in the Swartzia genus, there’s something for everyone!
10. Cebil- Also known as Curupay or by the exaggerated name Patagonian
Rosewood, Cebil is not a true rosewood. It has a highly variable streaked
appearance not too unlike Goncalo Alves.
There are 115 species of maple. Only 5 commercially important species grow in the U.S. Two of the five are hard rock maple and sugar maple. Maple is so hard and resistant to shocks that it is often used for bowling alley floors. Its diffuse evenly sized pores give the wood a fine texture and even grain. Maple that has a curly grain is often used for
violin backs (the pattern formed is known as fiddle back figure). Burls, leaf figure, and birds-eye figures found in maple are used extensively for veneers. The Birds eye figure in maple is said to be the result of stunted growth and is quite rare.Maple is used extensively for American colonial furniture, especially in medium and lower priced categories.It can also be stained to simulate cherry wood, which it resembles.
You have questions about our work or materials? Don’t be afraid to contact us. We’’ll gladly answer to all of your questions!